Tadano up 15%

Tadano has reported its nine month results, which show revenues up 15 percent for the year, while profits have risen more than 43 percent.

Total revenues for the nine months were ¥145.1 billion ($1.2 billion), 15 percent higher than last year, which was made up principally as follows:

Mobile cranes ¥97.4 billion ($822 million) – up 18.5 percent,
Loader Cranes ¥15.2 billion ($128 million),
Aerial work platforms ¥11.3 billion ($95.3 million).

Mobile crane sales in Japan increased 33 percent to ¥29.7 billion ($250.6 million), while exports were up 13 percent to ¥59.9 billion ($505.4 million).

Geographically sales for the period – all products – were up 24 percent in Europe, 23.5 percent in North America, 38 percent in South and Central America and 44 percent in Asia, while the Middle East was virtually flat and Australia/Oceania declined almost 19 percent.

The company expects the full year to end almost 10 percent up on last year, at ¥198 billion ($1.67 billion), of which mobile cranes will be around 67 percent. It expects pre-tax profits to come in around ¥25.8 billion ($217.7 million).

The company said: “The Japanese economy recovered at a gentle pace during the period under review. Personal consumption and production trended toward recovery. Reaction to the consumption tax hike weakened, while corporate earnings and capital investment remained largely unchanged. Falling crude oil prices and other factors have recently contributed to a sense of uncertainty. Within our industry, driven by factors including earthquake restoration and recovery, disaster preparedness and mitigation, and efforts to address an aging infrastructure, increasing utilisation rates in the Japanese market resulted in a perceived shortage of cranes. Demand grew, backed by rising prices and improving business confidence after the decision to hold the 2020 Olympics in Tokyo.”

“Overall demand fell outside Japan, with some regional variation. Demand fell in North America and Australia, remained largely unchanged in the Middle East, and grew in Europe and Asia. Sales outside Japan increased 11.2 percent, thanks to company efforts that focused on expanding sales of larger products and on capturing demand related to plants and infrastructure.”

Another solid result from Tadano which is making good progress in sales in North America and parts of Europe. The company is building a solid following for its All Terrains worldwide and its Rough Terrain cranes in the USA where they are gaining an increased following, in spite of strong competition from the well regarded locally built products.

Tadano still lags the three other major manufacturers in terms of marketing and distribution, and even brand awareness, but the quality and reliability of its products is winning it a lot of repeat business. This year it is planning a host of new All Terrain cranes, including 70, 100 300 tonne models and possibly a new larger crane, rumoured to be in the 700 tonne region.

Africa’s first GMK 6400 for Mobicrane

Ghanaian rental company Mobicrane has taken delivery of the first 400 tonne Grove GMK6400 All Terrain crane in Africa, from local distributor Paterson Simons.

The six-axle GMK6400 has become the rental company’s flagship crane, with its 60 metre main boom and a 134 metre maximum tip height, when combined with its 79 metre luffing jib. Features include a 12×8 drivetrain, Grove’s self-rigging Mega WingLift system and a single superstructure mounted engine, driving the carrier through a drive line that passes through the slew ring.

The crane was handed over to Mobicrane at Grove’s German production facility in Wilhelmshaven, with Paterson Simons’ senior engineer receiving specific rigging and diagnostic training.

Coussens takes on Terex

UK-based crane rental and heavy haulage specialist Coussens has taken delivery of a Terex Challenger 3160 all terrain crane.

The three-axle all terrain is the fifth Terex model to join the company’s fleet. It has a 55 tonne capacity, a 50 metre single-cylinder telescopic boom and a capacity of 35.6 tonnes at four metres radius. The all terrain has a 6.8 tonne counterweight and can operate under the 12 tonne axle load limit.

Paul Coussens, Coussens owner, said, “When other cranes need triple or quadruple reeving, the Challenger does the job with just one or two lines. Another important plus point is the crane’s -5 degree boom incline. It means the operator doesn’t have to work at height to reeve the crane, which represents a significant safety advantage. So too is the Challenger’s radio remote control system.”

New Tadano for I&H Kran Transport Montage Service

Crane service provider I&H Kran Transport Montage Service, based in Germany, added a 6-axle Tadano ATF 400G-6 all terrain crane to its fleet.

Nils Laumann, I&H member of the management, said, “Normally, such a lifting capacity is only provided by 7-axle machines, which restricts flexibility enormously. The ATF 400G-6 takes us through all roundabouts in our core area and need not be accompanied by escort vehicles.

“As we keep our fleet permanently up to date, the resale value of the cranes is essential. With the two engines, I can verify the precise number of operating hours of both machines without any problems; this is a strong selling point,” Laumann continued.

Daum HKS expands with Tadano

Crane service provider Daum HKS in Germany has added a 5-axle Tadano ATF 110G-5 all terrain crane to its fleet.

Jürgen Klee, Daum HKS managing director, said, “Our decision for the ATF 100G-5 has proved to be worthwhile. The crane is capable of much more performance than you would expect from such a vehicle based on work experience.

“Due to the dual-engine concept, Tadano cranes are perceptibly more economical and extremely powerful – even without additional counterweight, which can be noticed especially when such a crane is used as mobile crane or taxi crane.”

The model was delivered to the company in November 2014.

FESCO buys two TADANO ATFs

FESCO, Ltd. purchased two new ATF 180G-5 cranes from TADANO America. The ATF 180G-5 has a capacity of 200 tons and a maximum lift height of 324 feet. FESCO, Ltd, a Texas-based oilfield service company, plans to use the all-terrain cranes in a variety of ways.

The ATF 180G-5 features cameras on the main and auxiliary winches.