Liebherr provides rescue sheets

Liebherr has started to provide rescue sheets for its mobile cranes in order to assist with crane recovery following an incident.

All Liebherr LTM and LTC cranes which comply with stage 3b or higher emissions will now come with a rescue sheet as standard. Available separately and located behind the driver’s seat, the rescue sheet provides detailed information about the structure of the crane and its cab as well as the best places to cut the bodywork open in order to free a trapped operator. It also provides information on the locations, volumes and hazard classes of the crane’s fuel and oil.

Rescue sheets have been available for new cars, commercial vehicles and trucks for some time now, although cranes are a niche product and relatively unknown to fire and emergency services. Liebherr said the aim of the rescue sheets is to enable the fast rescue of passengers and the safe recovery of the crane following an incident.

Crane dropped in tandem lift

Two ship cranes dropped a large mobile telescopic crane they were lifting in tandem at Fremantle port in Australia on Tuesday.

The hoist rope on one of the two cranes clearly failed dropping one end of the crane which then slipped from both sets of rigging. The mobile crane dropped into the ship’s hold, sending those working in the area scurrying for safety. One man was caught by the falling mass and suffered minor injuries.

The local union claims that the ship based employees carrying out the lift were not qualified under Australian regulations. The lift was clearly being carried out in a slapdash manner with one of the hoist lines not directly over the load, therefore applying a side load. It also looks like one crane might be carrying more of the load than the other?

The Australian Maritime Safety Authority (AMSA) has detained the vessel while it investigates the incident. Click here to view a video of the incident.

Mobile Crane Counterweights – an Important Safety Factor

Mobile cranes are heavy equipment vehicles that have been designed to lift, lower and transport heavy loads. They are employed in the off-highway industry to move freights beyond the normal capability of a man. Every crane has a set of counterweights which guarantees the counterbalance and prevents the machine of toppling over.

Why it is important to apply proper counter weight?

The counterweight plays a critical role. If it is not designed properly and doesn’t possess the right size and shape, it turns automatically into an extremely dangerous subject that can make the vehicle topple over in the direction of the load or backward. When trying to lift a load, a crane can topple over in the load’s direction if the counterweight set up is too light for the load and booms the configuration.  Otherwise, the counterweight can topple a crane backwards in situations when:

  • The counterweight is too heavy for the boom configuration.
  • The crane is traveling up a slope.
  • When the crane is on soft ground, inadequate timbers are placed under the outrigger pads below the counterweight.
  • Outriggers or any other ground support are not extended or lowered into position and cannot resist the combined weights and tipping forces.
  • If the boom configuration is lifted too high and there is not enough load applied on it.

 

How to Avoid Mobile Crane Accidents?

Calculating the proper counter weight
Toppling over happens mostly because of mathematical miscalculation. Therefore, it is essential to set the correct weight and size prior to the manufacturing process during the design phase. This is the only way to secure the safe performance of the crane counterweight.
Using the following mathematical formula, while designing the component, will minimize possible risks and secure reliable counterbalance:
P = V x μ x g
Where P is the weight of the required counterweight; V – its volume; μ –  is the density of the material of which the counterweight was made of and g – the gravitational constant (9.81).

 

Cast iron counterweights are the safest option
Mobile cranes are far smaller than the fixed crane configurations, but still facing the same loads challenges. Especially because of their size, they need small, but very heavy counterweights. Thanks to its density only cast iron counterweights can meet those requirements.

 

Crane load charts
Crane load charts should be posted in sight of the operator. They should contain, very well structured, all important information about counterweights, vehicle’s configurations and boom angles. Also, the mobile crane operator should be aware of the vehicle’s limited capacities by structural strength and by stability.

 

Regular inspections
Safe and risk reduction safety guidelines should be followed on a daily basis to ensure that the vehicle is in proper working condition. Preventive maintenance and safety inspections should be regularly performed to detect potential accidents.

Mobile crane counterweights ensure the safe operation of the vehicle by keeping it stable and upright. Best design practices, most reliable raw material selection as grey cast iron and regular safety inspections are essential for the performance of a high-quality counterweight.

Writer Bio

Ralitsa Peycheva is a technical content writer, interested in forging and casting techniques, latest machinery and tools; curious about new manufacturing methods; respecting high-quality engineering; discovering, observing and admiring the additive manufacturing industry. Follow me on Google +  


Company Profile

fmgc

FMGC is a subsidiary of the industrial group Farinia and is specialized in gray iron casting. With its 110.000 tons of manufactured cast metal capacity and 330 employees, FMGC is one of the undoubted leaders in this field. Cast metal counterweights applications are used on heavy equipment for material handling, construction, agriculture or on off-highway vehicles. These include forklifts, excavators, front loaders, mobile cranes and tractors. Thanks to our know-how, a result of long experience and permanent improvement, we supply some of the most famous brands as Manitou, Toyota, Pinguely-Haulotte, Dufour, JLG, Komatsu, Liebherr, Manitowoc, Demag Terex, Linde, Nissan, MCI and Volvo.

Follow us on:

LinkedIn

YouTube

Google+